Caractéristiques du produit
·No need to switch between high and low pressure, easy pumping operation, low system energy consumption
·2-4% lower than peers, saving about 30,000 yuan in fuel per year
·Easy maintenance, low failure rate
·Independent dual oil tanks, high system cleanliness, 30% reduction in hydraulic oil consumption, hydraulic oil
·life doubled, saving about 10,000 yuan in operating costs per year
·The end hose of the boom is at the rear of the vehicle, and the delivery pipe does not need to be extended to clean, which is convenient and fast
·Equipped with an engineering plastic water tank to prevent rust, increase life and save worry
·The front leg is a secondary leg, which is stable and occupies a small area. It is not afraid of narrow site construction.
With the bionic six-section arm, the range of fabrication is wider
Paramètres du produit
| Four-axle 59M Mercedes-Benz Pump Truck | |
| Maximum theoretical delivery volume（m³/h） | 180 |
| Maximum concrete outlet pressure (MPa) | 11.3 |
| Rated working pressure (MPa) | 42 |
| Fréquence de pompage (min-1) | 26 |
| Concrete cylinder diameter × stroke (mm) | Φ260×2100 |
| Structural form / | 59X-6RZ |
| Maximum material distribution (height/radius/depth) (m) | 58.1/52.9/41.7 |
| Leg span (front х rear х longitudinal) (mm) | 9540 x 13895×11564 |
| Norme d'émission | National VI emission |
